|
|
Ring Dispensers
Ring dispenser (figure 1)
Retaining rings to DIN 6799
Retaining rings to DIN 6799
Application:
for retaining rings RA 1,2 ÷ RA 10
The retaining rings stacked on insertion strips are fitted on the device using the insertion strip and are removed using an applicator. Gripper see accessory dimension list 32
Ring dispenser (figure 2) Crescent rings
Application:
for crescent rings H 3 ÷ H 20
The rings* held together by an adhesive tape are slid onto the device, the adhesive tape is removed and the rings are removed from the dispenser using an applicator.
* Phosphated only, not oiled
|
|
|
|
